Our Sponsors Minimize
You are currently viewing the
MAY 2013 issue of
Rental Management

Construction/Industrial Equipment Products

This month, Rental Management looks at construction/industrial equipment including generators, light towers, compressors, forklifts, trailers and more.

JCB forklift

912-447-2000; jcbna.com

The TLT 35D Teletruk forklift from JCB, Pooler, Ga., combines the small footprint of an industrial counter-balanced lift truck with the telescopic boom of a telescopic handler. The TLT 35D has a fully enclosed hydrostatic drive system and a hydraulic quick-disconnect carriage for forks or a shovel. The machine will lift 7,000 lbs. to a height of up to 14 ft. Users can change attachments in under 20 seconds without leaving the cab using the hydraulic quick-disconnect, the company says.

Equipment Lock Co. wheel lock

866-565-4887; equipmentlock.com

The heavy-duty wheel lock from Equipment Lock Co., Winchester, Va., when installed, stops any wheel from rolling. The company says the lock fits all types of equipment and trailers, including tow-behind portable light towers. The lock comes with an adjustable wheel lug cover to prevent thieves or vandals from removing the wheel.

Mi-T-M air compressor

800-553-9053; mitm.com

The AC1-HM04-05M hand-carry, 5-gal. single-stage gasoline air compressor from Mi-T-M Corp., Peosta, Iowa, has a 136cc Mi-T-M engine and twin tanks in a powder-coated steel frame cage with double handles. Its compressor creates air displacement, pressure and flow at 4.4 cfm at 100 psi, and the compressor pump features an oil lubricated crankcase, aluminum head for heat dissipation, cast iron cylinder, stainless-steel braided discharge hose and canister inlet air filter.

Blue Angel Pumps transfer pump

888-636-6628; blueangelpumps.com

The Model EC50K portable transfer pump from Blue Angel Pumps, Harrison, Ohio, has a debris strainer and a custom carrying case. The pump has a cast-iron housing and the ½-hp motor can move up to 24 gpm or deliver up to 40 psi.

Spider safety rail

877-774-3370; spiderstaging.com

The SpiderRail™ temporary, non-penetrating guardrail system from Spider, a division of SafeWorks, Seattle, is used to protect workers from fall hazards in the restoration, new construction and process industries. The company says it is designed for efficient assembly, and meets and exceeds OSHA’s fall protection requirements. The 30-lb. base plate and system is designed to be stable and sturdy without a return or outrigger at the path ends. Swivel clamps and patented interconnection features provide strength, the company says. The SpiderRail™ comes with built-in toeboards and pre-engineered fabricated panels.

NoRamp Trailers trailer

574-206-1331, noramp.com

The trailers from NoRamp Trailers, Elkhart, Ind., have a three-degree approach angle designed to help prevent injuries to backs, legs and toes. The trailer can be loaded or unloaded with or without the tow vehicle attached.

Rig Source crawler carrier

630-365-1649; rigsourceinc.com

The Terramac RT9 crawler carrier from Rig Source, Elburn, Ill., has rubber tracks and a ground pressure of 4.9 psi when fully loaded. The company says the RT9’s 230-hp Cummins diesel engine can haul people, fuel, equipment, stone or other materials smoothly over terrain too rough for wheeled vehicles and can be transported without oversize permitting. It is 17 ft. 7 in. long and 8 ft. 5 in. wide. Excluding mount, the rig stands 9 ft. 3 in. tall with a 20-in.-minimum ground clearance. With mount, the carrier’s traveling speed is 2.5 mph to 6 mph, and it has a 10-ft. turning radius.


Page 2


IMT compressor

800-247-5958; imt.com

The CAS45R rotary screw air compressor from Iowa Mold Tooling Co. (IMT), Garner, Iowa, has a rated capacity of 45 cfm at 150 psi, while the CAS60R model provides air delivery of 60 cfm at 150 psi. Both models are hydraulically driven, continuous-duty rotary screw units with single-stage, pressure-lubricated compressors designed for heavy-duty use in mobile applications. The CAS45R and CAS60R each have a hydraulic aftercooler that is integrated into the compressor design to reduce the weight and size of the unit.

Multiquip water trailer

800-421-1244, multiquip.com

The WT5C water trailer from Multiquip, Carson, Calif., is a DOT-approved double-axle trailer. It has a Multiquip QP2H 2-in. centrifugal water pump, a seamless 500-gal. polypropylene water tank with six internal baffles, a 2-in. steel tank, and a simple water manifold management system, the company says. The WT5C delivers 158 gpm at 115 ft. of head. The water manifold design provides multiple suction/discharge options, including 1.5-in.- and 2-in.-diameter left side suction and discharge, 2-in.-diameter suction and discharge with quick disconnect cam-and-groove couplers, two standard garden hose adapter/couplers, and an integrated rear spray bar assembly that can operate under multiple pressure settings.

Region Welding trailer

636-583-4110; regionwelding.com

The SSLT Model 11 tilt trailer from Region Welding of Missouri, Union, Mo., is one of several standard trailers produced by the company. In addition to the tilt trailer, the company also designs and manufactures trailers rated to carry 3,500-lb. loads up to 24,000-lb. loads with a variety of options.


Bobcat utility vehicle

800-743-4340; bobcat.com

The 3600 utility vehicle from Bobcat, West Fargo, N.D., has a low-maintenance hydrostatic drive with dynamic braking that slows the flow of oil, slowing the machine
with less brake power. The 3600 has a 1,250-lb. cargo box capacity and can tow trailers up to 2,000 lbs. It also has a two-range transmission, adjustable shocks and a top speed of 30 mph.


Atlas Copco compressor

651-290-0000; atlascopco.us

The XAS 185 portable compressor from Atlas Copco, Commerce City, Colo., is designed to provide compressed air to drive pneumatic tools as well as for high free-air delivery applications such as sandblasting. The XAS 185 is powered by a John Deere diesel engine. All controls are located on a single panel. Body parts are made of powder-coated Zincor™ steel. The canopy also can be supplied in impact-resistant HardHat™ polyethylene.


Magnum Power Products solar hybrid light tower

800-926-9768; m-p-llc.com

The MLT4000S solar hybrid light tower from Magnum Power Products, Berlin, Wis., runs on batteries charged by its solar panel array or its on-board LP-fueled generator. During the day, the solar panels will charge the battery for nighttime operation. The unit’s LP-fueled generator will charge the batteries if the solar panels are unable to do so. The unit has a standard seven-day programmable controller to operate unmanned for extended periods of time. The unit’s LED light fixtures offer more than 50,000 hours of operation and require no strike or cool-down time during operation, the company says, as they turn on and off instantly for immediate use of the light tower.


Terex wheel loader

662-393-1800; terex.com/construction

The TL310 wheel loader from Terex Construction, Southaven, Miss., handles bucket capacities of 4 to 6 cu. yds. and has a bucket breakout force of 34,534 lbs. The TL310 has an operating weight of 38,801 lbs. with a straight tipping load of 29,101 lbs. The machine is powered by a 203-hp Cummins turbocharged diesel engine. The company says the TL310’s traction, provided by the load-limit-controlled hydrostatic VarioPower system, makes the power loader capable of quickly accelerating to 25 mph.



Page 3


Chicago Pneumatic compressor

800-760-4049; cp.com

The CPS 275 portable compressor from Chicago Pneumatic Construction Equipment, Independence, Ohio, has a 74-hp Kubota engine with a sound suppressed enclosure. With an overall length of 148 in., an overall width of 66 in., and a height of 58 in., the CPS 275 is designed to be more maneuverable, the company says.

Cushman utility vehicles

706-798-4311; cushman.com

The Titan utility vehicles from Cushman, Augusta, Ga., come in three models with different features. The Titan LD seats two passengers and its 36V DC motor powers a 1,750-lb. payload capacity. It comes with optional brake lights and rear and front bumpers. The Titan HD comes in a two-passenger model with a choice between a 36V or 48V DC electric motor. It has a 2,500-lb. payload and 3,600-lb. towing capacity. The Titan XD has a 5,000-lb. towing capacity and 3,000-lb. payload capacity.

WorkSite Lighting job-site light

877-861-5255; worksitelighting.com

The 70W LED explosion-proof light from WorkSite Lighting, Prairieville, La., is designed for use in hazardous location work areas. The XP 70W LED light is vibration resistant, carries a one-year warranty for industrial use and is rated for Class I Division I areas with explosion-proof requirements. The 70W LED is designed for portable use and offers numerous mounting options to fit the specific needs of each job site or application. The 70W LED offers 5,800 lumens of true white light with little to no heat, the company says.

Royal Truck attenuator trucks

888-972-9827; tmatrucks.com

Custom-built attenuator trucks from Royal Truck & Equipment, Coopersburg, Pa., are made on new and low-mile used chassis. The company says modular body design is customizable and that it affixes a final stage manufacturer’s decal to every truck it alters.





If you have any news that you would like to share, click here to contact our editors.

Copyright © 2014 by The American Rental Association all rights reserved.