Our Sponsors Minimize
You are currently viewing the
MAY 2012 issue of
Rental Management

Products: Trailers
Redi Haul quick and easy

The Xpress line from Redi Haul Trailers, Fairmont, Minn., is available in a 21-ft. and 25-ft. model. The Xpress has heavy gauge steel construction, a swing-up jack, heavy-duty D-rings and a 4-ft. ramp that folds flat into the deck, which is made of 2-in. treated pine. The Xpress trailers generally have a capacity of about 1,800 lbs., however the RX12UTE with a 5,200-lb.-rated axle and electric brakes has a capacity of 3,890 lbs.



Power Products low angle

The NoRamp trailer from Power Products, Elkhart, Ind., has a 3-degree load angle. The deck lowers at the axles with the push of a button. The U-19 has an 80-in. wide, 19-ft. long pine, oak or steel mesh deck. The trailer has 16-in. radial tires, brakes on all four wheels, a 7,000-lb. rated jack and 6-in.-by-6-in. structural steel frame.



Towmaster gooseneck

The T-70HT trailer from Towmaster, Litchfield, Minn., has a 70,000-lb. capacity, a 102-in. load width and a 43 to 48 ft. overall length. The T-70HT has a perimeter frame design, fifth-wheel gooseneck with top deck,
hydraulic folding tail and 12,000-lb. winch. It comes standard with LED lights, Angelim Pedra wood deck and dual parking jacks. Several configurations and options are available.



Trail EZE lowboy

The TE100RG rigid gooseneck trailer from Trail EZE Trailers, Mitchell, S.D., has an overall length of 39 to 53 ft. and a main deck length of 17 to 31 ft., an upper-deck length of 8 ft. and a width of 8 ft. 6 in. The frame is made of high tensile steel with beams designed for stress loads of at least two times capacity, the company says. The deck is 1.5-in. oak that is attached to each crossmember with two torx-head screws.



Landoll easy loader

The 930C Traveling Tail trailer from Landoll Corp., Marysville, Kan., has a 15-ft. long tail to provide an 11-degree load angle. The traveling undercarriage is pulled forward, lowering the tail to the ground with one hydraulic lever. When the undercarriage is returned rearward, the tail raises into transport position
with a lifting capacity of 24,000 lbs. centered on the tail. Standard equipment includes a 12,000-lb. work gear winch, tin lockable upper-deck-mounted tool boxes and Grote LED lights with sealed wiring harness. The entire frame is powder-coated.







If you have any news that you would like to share, click here to contact our editors.

Copyright © 2014 by The American Rental Association all rights reserved.