Fiesta Tents tents

Booth No. 4366

The Legacy Series tents from Fiesta Tents, St-Laurent, Quebec, Canada, are offered in 40- and 50-ft. widths. The Legacy Series has curved lines for an innovative look, the company says, and is designed to combine the advantages of frame tents and clearspan structures. The Legacy has kedered roofs and walls, and a curved crown connection for installation of roof covers. The company says a Legacy extrusion maintains structural integrity of the frame while creating lightweight rafters and uprights, which allow for erection with a four-man crew.

800-465-5070

fiesta.ca
 

Economy Tent International sidewall system

Booth No. 3453

The Slidewall Trac® System from Economy Tent International, Miami, is an accessory for the company’s Trio frame tent and other tent systems. The system creates sliding sidewalls for small tents. Sidewalls can be slid to the side and held to a tent leg with an adjustable webbed tie-back.

800-438-3226

economytent.com
 

Alloyfold New Zealand chair

Booth No. 4562

The Alloyfold 6, the third-generation aluminum folding chair from Alloyfold New Zealand, Christchurch, New Zealand, is designed to be 30 percent lighter than steel equivalents, the company says. The seat has more material than its predecessor for added strength, as well as a modified alloy for greater load capacity.

888-368-7713

alloyfold.com
 

Tablecloth Co. fabrics

Booth No. 4556

Allure ribbon-embroidered cloth from Tablecloth Co., Paterson, N.J., is 100 percent polyester, and machine washable and dryable. Allure can be used as a topper with an aqua Athena Satin border over a white Satin cloth. The company says although the ribbon embroidery is three-dimensional, it is soft and provides a stable base for glassware.

800-227-5251

tablecloth.com
 

Creative Coverings fabrics

Booth No. 4266

The fabrics from Creative Coverings, Sparks, Nev., come in a variety of colors and patterns from contemporary to eclectic and glam, the company says. These include new chevron and Moroccan patterns.

877-410-6367

creativecoverings.com
 

Giffy Tent Barrels tent barrels

Booth No. 4674

Tent Barrels from Giffy Tent Barrels, Boynton Beach, Fla., are designed with vertical grooves to accept a tent pole as well as an eyebolt at the bottom inside of the center of the barrel for the tent strap and a bottom mounting plate to accept the pole. Each barrel weighs 660 lbs. when filled. The company says up to 50 barrels can fit inside a standard pickup truck bed.

401-203-5335

giffytentbarrels.com
 

Central Tent tent

Booth No. 4458

The Tension Style frame tent from Central Tent, Santa Clarita, Calif., has an arch contour valance, so that the fabric can be pulled tight at the leg point. It has no strapping buckles except in the mid-center to help prevent rain pockets from forming and is adjustable by pulling the ratchet rope tightly, the company says. A D-tube frame also can be used to replace the standard 2-in. frame.

800-997-8368

centraltent.com
 

McCourt Manufacturing portable dance floor

Booth No. 3061

The Ovation portable dance floor from McCourt Manufacturing, Fort
Smith, Ark., is made of precisely squared 3-ft.-by-3-ft. panes with tongue
and grove anodized extruded aluminum panel trim embedded into the
¾-in. plywood core. The panel backs are spray sealed with GatorBack™
coating designed to provide traction and moisture resistance for protection
against slippage and outdoor elements.

800-333-2687

mccourtmfg.com
 

Action Lighting LED lighting

Booth No. 2554

The M5 LED mini light sets from Action Lighting, Bozeman, Mont., have 100 LED lights spaced 4 in. apart on a 34.5-ft. white wire. LEDs are available in white, warm white or multi colors. Up to 30 sets can be connected.

800-248-0076

actionlighting.com
 

Boss Manufacturing cupcake stand

Booth No. 3666

The contemporary gold cupcake stand from Boss Manufacturing, Orland, Calif., is handcrafted in the U.S. and powder-coated in gold finish.

800-832-4941

bossmanufacturing.com
 

RSS Distributors flatware

Booth No. 2058

Barenthal flatware available from RSS Distributors, Manheim, Pa., is made of virgin steel and manufactured to exacting standards in a state-of-the-art facility in China, the company says. Barenthal is available in five patterns in stainless and one in gold plate.

800-233-0175

rssd.com

Meese Orbitron Dunne Co. material handling truck

Booth No. 3166

The Poly-Trux® P-405 extra heavy-duty tilt truck from Meese Orbitron Dunne Co., Ashtabula, Ohio, has a proprietary internal rib design, hidden steel tube support frame and one-piece, rotationally molded construction designed to handle loads up to
2,200 lbs. in a 1-cu.-yd. capacity. The base is powder-coated steel with 12-in.-by-3-in. rear wheels and 5-in.-by-2-in. swiveling casters. The cart is rotomolded from 100 percent waterproof polyethylene (HDPE).

800-829-4535

recycleosaurus.com

Maywood Furniture Corp. table

Booth No. 2855

The Standard Series 30-in.-by-72-in. plywood folding table from Maywood Furniture, Maywood, N.J., has a rectangular top made of 5/8-in. plywood with a choice of either channel aluminum or black vinyl flush edging. The wishbone style powder-coated metal frame has full-length wood runners. Black plastic glides come standard.

800-238-6797

maywood.com

LaCrosse portable bar

Booth No. 3661

The stow-away bar from LaCrosse, Onalaska, Wis., has a patented design that allows the bar to be stored in a 2-sq.-ft. space when not in use. It has  stainless-steel work surfaces, a 24-in. removable stainless-steel speed rail, heavy-duty casters and storage bumpers. The ice bin with drain and petcock valve holds about 95 lbs. of ice.

800-345-0018

lacrossecooler.com