The Rental Show Exhibitor Products: Party and event

Show bound

This month Rental Management looks at party and event equipment that will be exhibited at The Rental Show 2013 in Las Vegas.

Special Event Sales chairs

Booth No. 2071

The chairs from Special Event Sales, Edmonton, Alberta, Canada, have 18-gauge tubular steel leg frames and three double-rived cross braces as well as ventilated polypropylene backs and 1½-in. fabric padded seats. The chairs also have injection-molded, non-marring
polyethylene foot caps and a powder-coated frame that is available in black or neutral with choices of fabric seat color.


A-1 Tablecloth Co. fabrics

Booth No. 2853

The traditional solid polyester fabrics from A-1 Tablecloth Co., South Hackensack, N.J., are made in the United States. Orders usually ship within 24 hours, with overnight service available, and include custom items, such as furniture covers
and tent liners.


Deal Associates chair stackers

Booth No. 1967

The Stack-Pal chair stack  spacers from Deal Associates,  Roxboro, N.C., are attached to the back side of folding wooden  chairs with the provided  stainless-steel screws. With the spacers installed, the company says folding wooden chairs can be stacked, transported and stored just like metal framed folding chairs. The Stack-Pal spaces the chairs from each other for ventilation and to prevent rubbing. It also has side tabs that align and stabilize the stack of chairs.


Granite Industries bleachers

Booth No. 1860

The “Fold N Tow” bleachers from Granite Industries, Archbold, Ohio, are available in sizes to accommodate 72 or 107 persons. The company says the unit  requires only one person to set up or tear down in 15 minutes or less, and can be towed with a ½-ton pickup truck. The center aisle has detachable hand rails that store on the back of the trailer.


Jomar Table Linens fabric

Booth No. 2765

The Nova™ Swirl material from Jomar Table Linens, Ontario, Calif., is a synthetic dupioni fabric with embroidery design. The two-color embroidery
runs throughout the material and is available in 24 colors.


McCourt Manufacturing table

Booth No. 3061

The Commercialite® industrial strength folding table from McCourt Manufacturing, Fort Smith, Ark., has a
hot polyethylene blow-molded top and fully welded 1-in. steel tubing legs and rails, which are pre-treated and then powder-coated. The Commercialite® table is designed to hold more than 3,500 lbs.



Page 2



Campus Products cutlery drying machine

Booth No. 2073

The SilverShine line of cutlery drying machines (CDM) from Campus Products, Mississauga, Ontario, Canada, is available in four sizes of machine able to handle from 1,500 to 12,000 pieces per hour. Cutlery is dumped directly from the dish machine, warm and wet, into the machine hopper and the CDM automatically dries the cutlery, removing water and chemical spots. As the cutlery is dried, it is gently agitated to maintain or restore shine. The company says everything also passes under a germicidal UV light.



Boss Manufacturing cupcake stand

Booth No. 3666

The Carrie Marie cupcake tree from Boss Manufacturing, Orland, Calif., comes in detachable round or square designs. The cupcake trees are made of metal and
handcrafted in the United States.



PS Furniture/Palmer Snyder chair

Booth No. 4258

The PremierComfort® sled base stack chair from PS Furniture/Palmer Snyder, Milwaukee, weighs 14 lbs. when stacked 30 chairs high. The chair has a 7/16-in.-diameter steel rod frame and the chair feet are designed to be non-slip and  non-marring. The chair is available with a solid or perforated back and comes in black, white or 11 new colors.



Economy Tent International tents

Booth No. 3453

The patented Trio Frame System tents from Economy Tent International, Miami, are available in 10-, 15- and 20-ft.-wide sizes. The tents have color-coded end-capped tubing, steel snap-button assembly and adjustable legs. Standard covers are manufactured with 18-oz. white black-out vinyl that is UV treated, flame retardant, water repellent and mildew resistant. The tents are engineered and wind-load tested up to 80 mph.



Midas Event Supply table

Booth No. 2455

The Expo Elite Series table from Midas Event Supply, Ontario, Calif., is a two-in-one table with adjustable legs for 30-in. standard and 42-in. bar heights. The ¼-in. void-free plywood top is finished with
protective polyurethane and is supported with ¾-in. plywood cross members. The Expo Elite series also has protective metal corners and non-marring feet, and is available in 4-, 6- and 8-ft. sizes.



Georgia Expo easel

Booth No. 2355

The aluminum “Quick Fold” easel from Georgia Expo, Suwanee, Ga., has rugged steel head pieces, stands 5.5 ft. tall and folds flat for storage. The easel has three levels of folding clips for custom placement.