Party Products: Tables, Chairs, Linens, Tabletop Items

Setting up the event

This month, Rental Management looks at tables, chairs, linens and tabletop items.

Special Event Sales tables

Plywood tables from Special Event Sales, Edmonton, Alberta, Canada, are made of birch and manufactured with water-proof exterior grade glue. The tables have a smooth lacquered surface and underside with rubber molding around the edge. The legs are constructed from high-grade steel bolted through the table top with a flat head carriage bolt and nylon locking nut. The tables also are equipped with full length wood runners bolted through the table and are available in multiple sizes in round, rectangular and specialty shapes.


Boss Manufacturing cupcake stand

The Banded Cupcake Tree — Square Silver from Boss Manufacturing, Orland, Calif., can be covered with cupcakes or any type of food. The display, built in the United States, is detachable and dishwasher-safe.


Kwik-Covers table covers

The Kwik-Cover lightweight, fitted vinyl table cover from Kwik-Covers, Syracuse, N.Y., has a specially-designed elastic edging that holds the cover in place. The elastic fits around the edges of the table like a fitted bed sheet, the company says, without using staples, tacks or tape. The covers are available in a variety of colors and sizes to fit most banquet and round tables. All banquet Kwik-Covers include a 4-in. self-adhesive tape strip along the length of each side for added support.


Tablecloth Co. fabric

The Jute faux burlap fabric from Tablecloth Co., Paterson, N.J., is designed to look like burlap, but is made of 100 percent polyester. Jute is currently available in five colors including natural, white, slate blue, black and grey.


McCourt Manufacturing tables with cart

The Party Cart from McCourt Manufacturing, Fort Smith, Ark., has a 22-in.-wide design and carries eight ProRentTM 30-in. or 36-in.-diameter knockdown pedestal tables. The tables have a PolyCoat finish and black vinyl T-edging and can be customized with optional wrap-around style aluminum SuperEdge or a Wilsonart laminate surface in black, wild cherry, Montana walnut, blackstar granite, graphite nebula and grey glace. The Party Pack™ includes eight each of the 30-in and 42-in. columns made of 16-gauge steel tubing with tapered ends, allowing no-tool assembly and knock down, the company says.


Commercial Seating Products chairs

The MAX resin folding chair from Commercial Seating
Products, South Hackensack, N.J., has a straight-leg design. The 12-lb. chair’s frame is designed to support a static load of 1,000 lbs. Stainless-steel hardware is recessed in the chair to avoid rusting, snagging and pulling, the company says. The MAX resin folding chair also has lock-tight stacking features.


Southern Aluminum tables

The Swirl table from Southern Aluminum, Magnolia, Ark., has a hand-etched randomly swirled pattern on the tops. The company says the pattern allows the table to be decorative without the use of linens and naturally camouflages any scuffs or scratches. The company offers Spandex leg wraps in a variety of colors.



Page 2


Ultimate Textile fabric

The Basic Poly fabric from Ultimate Textile, Paterson, N.J., is available in 74 colors at an ultra-wide width, seamless to 132 in. Basic Poly is one of 17 fabric lines Ultimate Textile now offers for rental or purchase.


The Chairville Co. chairs

The Twisted Chiavari line from The Chairville Co., Dallas, is made with aluminum and steel, and is welded as one piece that requires no assembly. The design includes a die-stamped seat and ergonomic backrest.


Deal Associates chair stackers/spacers

The Stack-Pal chair stack spacers from Deal Associates, Roxboro, N.C., are attached to the back side of folding wooden chairs with the provided stainless steel screws. With the spacers installed, folding wooden chairs can be stacked, transported and stored just like metal-framed folding chairs, the company says. The Stack-Pal spacers are designed to space the chairs from each other for ventilation and to prevent rubbing.



Alloyfold USA folding chair

The A6 folding chair available from Alloyfold USA, Tempe, Ariz., has a rust-free aluminum frame and a plastic UV resistant seat. A stack of 50 Alloyfold chairs is 4 ft. 11 in. high and the company says the 5.1-lb. chairs weigh 30 percent less than steel chairs.



PRE Sales table

The Rhino-Lite 60-in. round table from PRE Sales,
San Diego, is made from high density polyethylene resin and, according to the company, tested to hold
2,400 lbs. The weather-resistant table has a steel frame, steel auto-locking legs and a ¾-in. lip for skirting.



PS Furniture chairs

The C440 Wedding Classic folding chair from
PS Furniture, Lexington, Ky., uses a proprietary
two-part molding process and has embedded — not sprayed — UV protection to help maintain its color, the company says. The chairs have replaceable vinyl padded seats and a resin surface.



Georgia Expo adjustable height table

The adjustable height table from Georgia Expo Manufacturing Corp., Suwanee, Ga., is available
in 4-, 6- and 8-ft. lengths and 24-in. or 30-in. widths.
The tables adjust from 30 in. to 40 in. heights with a
positive button lock on square legs. The tables have
handcrafted wood tops with polar hardwood frames
and reinforced corners.